To download, you must be a member of Patreon at $50 or more

1.0.0
Osiris Sagira
Average print time: 21 hours
- Resin Printer ready
- Pre-supported
- Glue Required
This is the original model of Sagira, not the one used by Destiny Guardians but the one owned by Osiris.
To join both wings you need to print the pegs (PSG-007.stl)
File | Print X times |
PSOS-001.stl | 1 times |
PSOS-002.stl | 1 times |
PSOS-003.stl | 1 times |
PSOS-004.stl | 1 times |
PSOS-005.stl | 1 times |
PSOS-006.stl | 4 times |
PSOS-007.stl | 4 times |
PSOS-008.stl | 4 times |
PSOS-009.stl | 4 times |
PSOS-010.stl | 4 times |
PSOS-011.stl | 2 times |
PSOS-012.stl | 2 times |
PSOS-013.stl | 2 times |
PSOS-014.stl | 2 times |
PSOS-015.stl | 2 times |
PSOS-016.stl | 2 times |
PSOS-017.stl | 4 times |
PSOS-018.stl | 2 times |
PSOS-020.stl | 12 times |
PSOS-021.stl | 2 times |
PSOS-022.stl | 2 times |
PSOS-023.stl | 4 times |
PSOS-024.stl | 4 times |
PSOS-027.stl | 1 times |
PSG-007.stl | 6 times |
Except where otherwise noted, the content by PolygonCollectibles is licensed under a Attribution-NonCommercial-NoDerivatives 4.0 International License.